Bezel with 128×32 OLED display


This is a custom machined BEZEL supplied WITH an 0.91″ 128×32 OLED display. You can only buy them from our eBay shop

If you buy the OLED displays by themselves, they are a “raw” PCB with the display on the front. They aren’t very professional-looking. And mounting them into an enclosure or panel usually means a messily cut rectangular(ish!) hole and unsightly screw holes. The end result usually doesn’t look great.

This bezel make all the difference! It is custom-machined from Perspex/acrylic. The front face is not machined to preserve the nice black glossy finish of the Perspex. The retaining clip (that holds the display into the bezel) is machines from ABS, and is help in place with 2 screws (supplied).

The bezel is then glued the bezel into your enclosure or panel. The bezel overlaps the cut-out by 2mm all round, thus hiding the usual messy cut-out. 4mm of the bezel sits in the cut-out this leaving 2mm standing proud of the enclosure or panel surface.

The bezel is made so that the display is centred on the bezel, so the bezel is a little larger than our other 128×32 OLED bezel in order to centralise the display.

Overall, the end result is dramatically better in appearance, looks much tidier and more professional. And there are no screw holes!

The bezel is not an injection-moulded part. It has been individually machined out of Perspex/acrylic, so the sides of the bezel have a machined finish and the front is glossy. The retaining clip is machined from ABS.

How and where to buy this display and bezel combination

We make this bezel in-house, machined to fit the supplies 128×32 OLED display.

It is designed, manufactured, and stocked only in the UK, and is shipped from the UK only. This is NOT a re-sold component from our friends in the far East.

You can buy this bezel+display only and exclusively from our eBay shop.

We do not include  box, /enclosures, or adhesives.

Check out the images of this unique bezel